• Suitable for harsh climates and strong temperature changes
• Suitable for use in swimming pools, spas, maritime shores
• Resistance to strong acids, oils and stains
• It’s suitable for both indoor and outdoor use: flooring, wall cladding, paving, pool surrounds.
• Surface finishes and treatments: natural surface, sawn, hammered sides, etc.
• The fine-grain and mica content give the stone a “silver‐grey" shimmering effect.
• Because it is an orthogneiss, it has foliation/lineation (slight to moderate) typical of gneisses, which can influence how it breaks, how it accepts finishes, and how it weathers. (In general: gneisses like this behave similarly to granite in many structural respects).
• Water absorption under 0.4% is very low — meaning it resists water ingress, which is good for wet conditions/outdoors.
• Wear resistance factor of 0.70 means it is reasonably wear‐resistant
• These properties indicate that in terms of structural & durability performance, Silver Beola is a high‐quality stone, suitable for heavy duty uses (floors, steps, outdoor paving) as well as indoor.
• Hardness & Wear Resistance
• Chromatic Homogeneity: good consistency in colour.
• Because of its silver-grey tone and fine texture, visually it works very well for modern minimalist interiors (floors, walls) as well as exterior elements (paving, steps).
• The shimmer/reflection effect can enhance light – in interiors it brings subtle sparkle.
• Exterior paving, courtyards, walkways, driveways: The data (low absorbency, good compressive strength, decent frost/temperature‐change resistance) suggest it is well-suited to outdoor. The supplier marketing says: "a choice to make with your eyes closed also in places with adverse weather conditions, steep ramps, heavy traffic courtyards and more generally when you desire a stone whose existence could be forgotten over the years."

s""

• Ensure good drainage and avoid water stagnation.
• Re-seal more frequently (every 12–18 months).
• Use a water-repellent breathable sealer if exposed to heavy rain.
• Clean exterior surfaces with neutral detergent and a soft brush
• pressure washers can be used at low pressure only.
  soft mop, microfiber cloth, or sponge.
• Avoid abrasive pads or wire brushes.
• Rinse: with clean water and dry with a soft cloth to avoid streaks or calcium deposits.